Aluminum Chip De-oiling & Drying Line (ENV-ACD-3000) | Industrial Equipment | Henan Yushunxin Heavy Industry Technology (ENV)

Machine Working Principle

Engineered for High-Yield Continuous Solid Waste Processing

CNC machining centers, milling machines, and automotive component casting produce vast volumes of aluminum turnings, swarf, and chips soaked in water-soluble cutting emulsions and cutting oils (residual moisture & oil 5% to 20%). Charging wet, oily chips into molten aluminum causes steam explosions, smoke pollution, and metal loss exceeding 30%.

Henan Yushunxin Heavy Industry Technology (ENV) Aluminum Chip De-oiling & Drying Line combines high-G continuous centrifugal separation, magnetic ferrous extraction, and thermal flash rotary drying to reduce residual oil and water content to below 0.1%, enabling briquetting or direct furnace charging with >95% recovery rate.

FEEDSTOCK STANDARDS Feedstock Material Policy & Purity Safeguards

Accepts: Aluminum machining chips, CNC turnings, milling swarf, casting flashings.
Prohibited: Massive solid ingot scrap, plastic bottles, ropes, floor sweeping sludge.

SYSTEM INTEGRATION SCHEMATIC

DCS Telemetry Enabled

Modular structure supports containerized ocean freight, fast on-site flange assembly, and multi-sensor oxygen/temperature interlocking.

Technological Breakthroughs

Equipment Highlights & Structural Advantages

Designed to exceed industrial safety, energy recuperation, and metallurgical purity requirements.

⚙

Feature 01

Dual-stage process: mechanical high-G centrifuge cuts thermal heating energy by 70%.

🛡

Feature 02

Recovers expensive cutting fluids and emulsions for re-use on machining floors.

⚡

Feature 03

High-intensity rare earth magnetic separator cleanly removes broken tool bits and steel chips.

🔬

Feature 04

Equipped with continuous spark detection and nitrogen purge extinguishing safety system.

🌡

Feature 05

Enables high-density briquetting with density exceeding 2.2 g/cm³ for optimal melt sink.

ENGINEERING SPECIFICATIONS

Technical Data Sheet & Parameter Matrix

Model: ENV-ACD-3000

Parameter Item / Specification	Engineering Standard / Technical Value
Target Feedstock	Oily aluminum CNC turnings, milling chips, cutting swarf, sawing fines
Processing Capacity	1.0 - 5.0 Metric Tons / Hour
Initial Moisture & Oil Content	5% - 20% by weight
Final Residual Oil & Moisture	< 0.1% (clean, dry, non-smoking dry chips)
Centrifugal G-Force	Continuous vertical centrifuge generating 800 - 1,200 G
Thermal Drying Chamber	Rotary flash drum operating at 300 - 380°C
Oil Recovery Mechanism	Oil-water separator for coolant recycling
Ferrous Removal Rate	Dual-drum rare earth neodymium magnetic separator (≥99.5% iron removal)

TURNKEY EPC SERVICES

Complete Factory Implementation Roadmap

From raw material pilot trials at our Zhengzhou testing base to ocean shipping, civil foundation guidance, on-site mechanical erection, and environmental acceptance.